We offer you a new drill head / drill bit for the use of manual earth augers with which a well can be drilled. This set is handmade and manufactured using much stronger material than necessary. The weld joints seen on the auger have been left intentionally unsanded to further prevent earth from slicing back. Furthermore, we don't sand the weld joints to prevent weakening. We have good reason to dispense with paint, because a thin oil film is best protection against corrosion in our opinion.
The drill is intended for use with clay, sand, and earth. Small stones are no problem, however, because the drill pushes these away, conveys them upward, or jams (depending on the size).
Technical data
Total length / max. drill depth: 1 m
Drill diameter: 90 mm
Auger pitch: 55 mm
Max. auger-plate length: 250 mm
Auger-plate material thickness: 4 mm
Tip elaboration: self-tapping tip
Mass: about 2.7 kg
Delivery
1 drill bit (D90)
1 screw + 1 nut (M 8)
One set of handling instructions is included with each delivery.
Delivery time generally amounts to 3–4 work days. These drills are manufactured in
An unpainted set treated with a light oil film is delivered. You'll enjoy long-term use if you treat the drill with an oil-soaked cloth after each use. However, isolated surface rust cannot be excluded.
We deliver exclusively through the 'DPD' company due to the weights, delivery times, and packaging sizes involved. We charge only the actual shipping rates, which are determined by the weight. We request that you take this into consideration during the assessments.
You can find other sets, extensions, drill bits, and handles in our shop.
Unfortunately there are no review yet. Be the first who rate this product.
